Want to Sell Schiess 90" Vertical Boring Mill
Schiess 90" VBM, With 79" Face Plate Table w/4 Sets of Jaws; (2) Swivel Ram Heads; Side Head; DRO on R.H. Ram Hd.; Spds. to 121 RPM; Pendant; Coolant – Under Power
Contact: James Jordan, Pres., Jordan Machinery Co., Inc., Greenwood, IN 46142 USA E-Mail: jmcmachine@aol.com Tel.: 317 – 882-1478
Want to Sell Autoclave, 8' x 42', composites/laminating,175 psi 475F,
Description: Thermal Equipment Corporation 8' x 41' Autoclave, Rebuilt 1992, Gas fired, with pressure and heat digital information system ASME #774
Notes*** This autoclave was acquired new by Boeing and was totally rebuilt in 1992 from the bare shell into a modern controlled autoclave and is holding Boeing tolerance and was used around the clock daily.
Notes*** Availability results from a Boeing requirement for a larger diameter autoclave to accommodate larger V-22 layups.
Notes*** The latest liquid penetrant report to verify the shell condition is attached. The door opening wedges were replaced and the lock ring was Non-Destructive Tested in 12-2008.
Internal Working Dimensions: 8' diameter x 41' long Uniformity report Gas Burner Heating System Hydraulic Bridge System Cooling Tower, Vacuum Pump System
Contact: Cecil Sterne, Sales, Sterne Machine Tool Sales, Sand Springs, OK 74063 United States E-Mail: csterne@sternemachinetoolsales.com Tel.: 918-243-5545
Want to Sell QTY: 4 NEW Toshiba 1000HP,1800RPM,N6310,4160V,TEFC,F1
QTY: 4 NEW TOSHIBA MEDIUM VOLTAGE MOTORS
1000HP 1800RPM N6310 4160V 3PH, 60HZ F1 TEFC BALL BEARINGS WINDING RTD'S BEARING RTD'S SPACE HEATERS
EMAIL ME TO MAKE AN OFFER OR FOR ADDITIONAL INFORMATION/PHOTOS.
THANKS, IAN
Contact: Ian Willman, Inside Sales, Matlock Electric Co., Inc., Cincinnati, Oh 45212 United States E-Mail: iwillman@matlockelectric.com Tel.: 5137319600
Want to Buy Westinghouse 50-DH-150D
Looking for stabs for a Westinghouse
50-DH-150D, 600amp
(4) line side stabs
(3) load side stabs
No contacts needed. I have photos and drawing if you need them.
Contact: Jamie Holland, South East Switchgear,
Birmingham, AL
E-Mail: jholland@seswitchgear.com
Tel.: 877-343-6490
Want to Sell Punch, Turret CNC
For sale:
Amada Pega 30 Ton 40 Station Modle 304040 Punch with Fanuc Controls.Thin Turret w/auto repo. Tooling. New 1983
Any interest? email carmine@bmcused.com for more info and photos.
Contact: Carmine Perrelli, BMC, Highland Park, IL 60035 United States E-Mail: carmine@bmcused.com Tel.: 888.926.0050
Want to Sell CRAINES & EQUIPMENT, SLINGS
HEAVY DUTY SLINGS, 29 FEET LONG 1 PAIR RATED FOR 42000 LBS AND 1 SET OF 4, 6 FEET LONG RATED FOR 30000 LBS. PICTURES ARE AVAILIBLE.
Contact: KEN HARRIS, SALES, LIMOTRIQUE, SHERBROOKE, QUEBEC J1L 2V4 CANADA E-Mail: ken@limotrique.com Tel.: 819-564-4410
Want to Sell Planer
80" X 60" X 30' Gray D-Housing, 4 Heads,AC/DC Electrics,DROs,U-power, Exc., 1956
Contact: rudy skoff, press, rms industries,
Cincinnati, ohio 45239 USA
E-Mail: rudy@rmsindustries.net
Tel.: 513-232-6666
Want to Sell Mitsubishi MH-5-B & Matsuura MAM-500-HF PC-11 ( Pallet Chang
http://machnet.com/buy/detail.cfm?inventoryid=29415
Mitsubishi MH-5-B 4th-Axis Pallet-changing Horizontal Machining Center New: 2000 Inventory ID: #29415
Specifications:
Travels: 25.6" x 25.6" x 25.6" Taper: Cat-50 Spindle Speed: 12,000 RPM Positioning Accuracy: +/- 0.00016" Repeatability: +/- 0.00006" Rapid Traverse: 1,575 IPM Pallet Size: 19.7" x 19.7" Spindle Drive: 30 HP Machine Weight: 29,100
Equipped With:
4th-Axis Mitsubishi Meldas 520 Coolant Thru Spindle
Under Power & Ready For Inspection!
Asking Price:
$115,000.00
Bring in your BEST OFFER! ________________________________________
http://machnet.com/buy/detail.cfm?inventoryid=29347
Matsuura MAM-500-HF PC-11 Horizontal Machining Center New: 1998 Inventory ID: #29347
Specifications:
X Axis Travel: 20" Y Axis Travel: 18.8" Z Axis Travel: 18"
Tool Stations: 60 Spindles: 1 Motor Power: 15 kw Spindle Speed: 8000 rpm
Equipped With:
CNC Control (10) Multiple Pallets
Available for removal June 1st, 2013
Price: Customer Looking For Offers!
Call ROCKY @ 310-909-2020
Contact: Rocky, Machnet, E-Mail: rocky@machnet.com Tel.: 310-909-2020
Want to Buy 3 to 4" Horiz. BoringMill
Need a good small 3" to 4" Horiz. Boring Mill; 36" Vert. and 48" Cross Would work
Contact: James Jordan, Pres., Jordan Machinery Co., Inc.,
Greenwood, IN 46142 USA
E-Mail: jmcmachine@aol.com
Tel.: 317 – 882-1478
Want to Buy Grinder, Centerless
Model #1
Contact: Dennis Donn, VP Wholesale Division, Altman Machinery Co,
Chicago, IL 60609 USA
E-Mail: dennis@altmanmachinery.com
Tel.: 773-247-4343
Want to Buy 25-30 Ton Wax Injection molder, Like Van Dorn & Cleveland
Contact: Joe Madison, President, Madison Machinery Co Inc,
Riverhead, NY 11901 USA
E-Mail: joe@madisonmachinery.com
Tel.: 631 722-4214
Want to Sell ROCKWELL 3JR HARDNESS TESTER
GOOD CONDITION WILSON/ROCKWELL 3JR HARDNESS TESTER
Contact: BOB KROHA, PERFORMANCE MACHINE TOOLS LLC, FREMONT, CA, USA E-Mail: BOB@PERMACH.COM Tel.: 510 2491000
Want to Sell TANAKA Laser System
4000 Watt TANAKA TF4000 LMXV40 Laser System, 13' X 53' Down-draft Table, 45' Rail Length, FAUC 16iLSr Control, New 2002, IP/UP
Contact: Brian Johnston, Johnston Machinery Corp,
Des Plaines, IL 60016 USA
E-Mail: BJMC2@aol.com
Tel.: 847 803-8700
Want to Buy FPE DSP-FM Feeder Module
Looking for FPE – DSP-FM
(Obsolete DSP-MKII feeder module)
Thanks,
Contact: Don Ketchabaw, Inside Sales , Ascent Solution Inc.,
Tillsonburg, Ontario N4G 4G8 Canada
E-Mail: dketchabaw@ascent.ca
Tel.: 1-800-565-6790
Want to Sell OKUMA LB 15 II 8 INCH CHUCK TURNING CENTER
SUPERB 1997 OKUMA LB 15 II 8 INCH CHUCK/ 2 INCH BAR, 12 STATION TURRET, BRAND NEW SMW QUICK JAW CHANGE CHUCK, TAILSTOCK, CHIP CONVEYOR, OSP 7000L CONTROL–RAN ONLY ONE PART AT MEDICAL COMPANY–BEST WE HAVE EVER SEEN!
Contact: BOB KROHA, PERFORMANCE MACHINE TOOLS LLC, FREMONT, CA, USA E-Mail: BOB@PERMACH.COM Tel.: 510 2491000
Want to Buy berco 270
berco 270 crankshaft grinder
Contact: jim sitlington, regional manager, mac-tech,
milwaukee, wi 53207 United States
E-Mail: james@mac-tech.com
Tel.: 970-744-8399
Want to Sell Wire Storage System
Interlake Mecalux/J & D Associates Model JDA-1-6-144 Vertical Carousel Wire Storage System
Contact: Rodger Sonneborn, Adams Machinery Company, Lincolnwood, IL 60712 USA E-Mail: rodger@adamsmachinery.com Tel.: 847-673-0556
Want to Sell Wire Storage System
Interlake Mecalux/J & D Associates Model JDA-1-6-144 Vertical Carousel Wire Storage System
Contact: Rodger Sonneborn, Adams Machinery Company,
Lincolnwood, IL 60712 USA
E-Mail: rodger@adamsmachinery.com
Tel.: 847-673-0556
Want to Sell Grinder, Surface
Available for sale:
6" x 18" Acer Supra 618 Grinder New in 2000
Any interest email carmine@bmcused.com for pics and info….
Contact: Carmine Perrelli, BMC,
Highland Park, IL 60035 United States
E-Mail: carmine@bmcused.com
Tel.: 888.926.0050
Want to Sell Hoffman enclosure A72XM3EW18FTC 72" X 120"X 18"
3 Door nema 12 dust tight .Used ,clean, orignal paint. Make a offer
shipping from 06365
Contact: Joe Piela, President, Piela electric,
Preston, CT 06365 USA
E-Mail: joe@pielaelectric.com
Tel.: 860 889 8476 ext 15
